The relationship between inertia and angular acceleration is very crucial in every machine design. It is even much important for the customers who wish to retrofit their existing equipment. In order to estimate torques well, you may need to use the magnetic torsion accelerator using a specified swiftness over a stated period of time. Physics prerequisite is required to understand how this works.

You are required to first calculate the angular speed of a machine so as to come up with its design. Angular velocity, results from the multiplication of inertia moment and the angular acceleration. It is commonly measured in the radians per second. Developing estimates for the moment of inertia may be challenging and thus you are required to generate approximations. The method is still effective when developing component sizing purpose and torque approximations.

To fully generate the required magnetrons in each field, you will need an input of the external energy. For commercial use, the input should be 60 megahertz wavelength and a well-grounded conductor base. The voltage feed should not exceed 250 kilovolts on the inside and 40000 volts on the existing wave probe. For domestic use, these specifications will be a bit lower.

The specific model works by turning the hydrogen gas in the surf guide to ions. The ions facilitate in the conduction of energy and magnetic field. The three phase stators, create the attractive fields that run in opposite directions. While in the internment chamber, the magnetic and torsion field twist the entire flux path.

The baseball magnetic confinement coil induces current into the spherical conductive confinement chamber. The induced current produces the mirror field inside the confinement chamber thus compressing the torsion field. The inertial confinement beam pass through the three phase electric stimulation stators converging at the epicenter of the field. This adds aggregate energy to the various fusion reactions.

The energy that is released from the torsion field is then compressed to expand the mirror field. The compression of the mirror field and the torsion field inward. The inner compression of the mutually fields burn the plasma to its fusion state. All the available thrust diodes accelerates pushing its entire plasma out. The induction stators continues with the storage of the stored energy inside the magnetic field.

The system works by converting the accelerated ions to direct electric output and then adding a coil to the entire thrust path. The current energy output is then converted to electricity via a means of heat energy in nuclear science. The said means include the liquefied salts as a primary heat exchange media. The medium is primarily used to boil water which is later used to drive steam turbines.

The entire finding works on the foundation of having an alternating current that is supplied to the various pairs of electric inductors and which in turn generate a magnetic field that rotates with the various oscillations of alternating current.

To find a trustworthy supplier of magnetic torsion accelerator customers should simply refer to this premier website. Here is the link that contains what you need on http://911odyssey.com/patent.html.